Link to Compliance Worldwide's Home Page


SUSCEPTIBILITY (IMMUNITY)
TESTING SERVICES



Green Line
TELECOMMUNICATIONS ELECTROMAGNETIC COMPATIBILITY (EMC) SUSCEPTIBILITY (IMMUNITY)

EN 61000-4-2 Electro-Static Discharge (ESD) Immunity

Our Electro-static Discharge Immunity test setup can provide up to 8 kV of contact discharge and 15 kV of Air discharge covering a wide variety of family product requirements.

ESD Test Setup

EN 61000-4-3 Radiated Radio-Frequency (RF) Immunity

Below is a photograph of our BiconiLog antenna used for Radiated RF Immunity testing to EN 61000-4-3 and for prescanning of products to Radiated Emissions standards such as FCC Part 15, IC ES 003 and EN 55022:1994. The chamber can generate fields up to 10 volts per meter and has been calibrated per the uniform field requirements of EN 61000-4-3 at 3 and 10 volts per meter.

RFI Test Equipment BiconiLog Antenna


















EN 61000-4-4 Electrical Fast Transient (EFT) Immunity

The Electrical Fast Transient test system can provide up 4 kV on single phase 230 Volt 16 Amp mains power and up to 2 kV via a coupling clamp onto I/O cables.

EFT Test Setup

EN 61000-4-5 Surge Immunity

Surge Immunity onto Mains powered single phase 230 VAC, 16 Amp devices can be applied up to 4 kV and I/O cables can be surged up to 2 kV via a coupling network.

Surge Test Stand

EN 61000-4-11 Voltage Dips, Interrupts and Short Variations Immunity

Voltage Dips and Short Interruptions 0 to 100 % onto Mains powered single phase 230 VAC, 16 Amp devices.

EFT SURGE VDI Test System


CE MARK IMMUNITY STANDARDS for
INFORMATION TECHNOLOGY EQUIPMENT
Per EN 50082-1:1992
(Effective for Products sold into Europe until July 1, 2001)

STANDARD DESCRIPTION
IEC 801-2 : 1991 Electrostatic Discharge Requirements
IEC 801-3 : 1988 Radiated Electromagnetic Field Requirements
IEC 801-4 : 1988 Electrical Fast Transient / Burst Requirements



CE MARK IMMUNITY STANDARDS for
INFORMATION TECHNOLOGY EQUIPMENT
Per EN 55024:1998
(Effective for Products sold into Europe after July 1, 2001)

STANDARD DESCRIPTION
IEC 61000-4-2 : 1995 Electrostatic Discharge Immunity Test
IEC 61000-4-3 : 1995 Radiated Radio-Frequency, Electromagnetic Field Immunity Test
IEC 61000-4-4 : 1995 Electrical Fast Transient / Burst Immunity Test
IEC 61000-4-5 : 1995 Surge Immunity Test
IEC 61000-4-6 : 1996 Conducted Immunity Test
IEC 61000-4-8 : 1993 Power Frequency Magnetic Field Immunity Test
IEC 61000-4-11 : 1994 Voltage Dips, Short Interruptions and Voltage Variations Immunity Test



CE MARK IMMUNITY STANDARDS for
ALARM SYSTEMS
Immunity Requirements for Components of Fire, Intruder and Social Alarm Systems
Per EN 50130-4:1995 + Amendment A1:1998

STANDARD DESCRIPTION
IEC 61000-4-2 : 1995 + A1 : 1998 Electrostatic Discharge Immunity Test
IEC 61000-4-3 : 1995 Radiated Radio-Frequency, Electromagnetic Field Immunity Test
IEC 61000-4-4 : 1995 Electrical Fast Transient / Burst Immunity Test
IEC 61000-4-5 : 1995 Surge Immunity Test
IEC 61000-4-6 : 1996 Conducted Immunity Test
IEC 61000-4-11 : 1994* Voltage Dips, Short Interruptions and Voltage Variations Immunity Test
*Note AC Power Ports Only

GO BACK TO MAIN PAGE

This page was last updated on May 23, 2002